Printronix T4204 Bedienungsanleitung PDF herunterladen (Seite 57)

Saving A Configuration

5. When the desired menu displays, press the6 key to access the available

options or submenus.

6. Press the

3or 4 key and hold to scroll through the values.

7. Press the ENTER key to select a value. An asterisk (*) displays next to

the selected value.

8. If there are more values you want to change, use the

3456 (LEFT,

RIGHT, UP, or DOWN) keys to access the value and the ENTER key to

select it. At any time, you may press the

5 key to return to the options

one level higher.

9. At any time, you may press the PAUSE key to exit the configuration menu

and place the printer online. Once you have finished selecting all your

options, save your configuration.

IMPORTANT

The printer must be placed in the Online mode before the new menu

selections or changes take effect.

IMPORTANT

If you do not save your configuration, all your new values will be lost

when you turn off the printer.

Saving A Configuration

You can save up to eight different configurations to meet eight unique print job

requirements. For example:

Factory: Factory Default (This cannot be altered.)

Config. 1: Selects RS-232 Serial Interface

Selects Page Width of 4 inches

Selects Page Length of 24 inches

Selects image Horizontal Shift of 0.20 inches, etc.

Config. 2: Selects Parallel Interface

Selects Page Width of 2.2 inches

Selects Page Length of 25.0 mm

Selects image Vertical Shift of 0.10 inches, etc.

The configurations are saved and stored in non-volatile memory for later use.

These configurations, including the factory default configuration, will not be

erased from memory when the printer power is turned off.

If you do not save your configuration (to the non-volatile memory) before you

turn off the printer, any changes made to that current configuration will be lost.

NOTE: If the Protect Configs. option is enabled, the new configuration will not

be saved unless the existing configuration has been deleted.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 231 232

Keine Kommentare

Printronix T4204 Bedienungsanleitung Seite 57